EDUCATIONAL PUBLICATIONS 2002

 

JOURNAL (INTERNATIONAL )

 
  1.  

E.S. Zainuddin, S.M. Sapuan, S. Sulaiman, M.M.H.M. Ahmad, Comparison of numerical and experimental studies of fibre orientation of short glass fibre reinforced thermoplastic composites, Plastics, Rubber and Composites, Processing and Application, (Journal indexed in Materials science Citation Index of ISI), 2002.

 
  1.  

S.M Sapuan and A. Norazmah, Development of a web-based learning and teaching module, Iranian Journal of Engineering Science and Technology, 2002.

 
  1.  

Selma Abedelrahman, Lawan Ahmed, Mohamad Daud and Abdul Rahman Ramli, “A New Authentication Scheme for Distributed Systems”, KKU Science Journal, Thailand, 30 (2) (2002) 75-87.

 
  1.  

Amhamed Saffor, Abdul Rahman Ramli and Kwan-Hoong Ng, “Objective and Subjective Evaluation of Compressed Computed Tomography (CT) Images”, Internet Journal of Radiology, 2 (2) (2002
  1.  

Hanan Hassan Ali Adlan & Abdul Rahman Ramli, “A Hybrid Neural Rough Approach to Pattern Recognition”, Suranee Journal of Science & Technology, Thailand, 9 (1) (2002) 1-7.

 
  1.  

M. Yusof Sulaiman, Ahmed Mohammed Akak, Mahdi Abdul Wahab, Azmi Zakaria, Zainal Abidin Sulaiman & Jamil Suradi, “Wind Characteristics of Oman”, Energy, 27 (2002) 35-46.
  1.  

N. Ismail, N. Abu Bakar, A.H. Juri, “Recognition of Cylindrical-Based and Conical-Based Features”, to appear in International Journal of Advanced Manufacturing Technology.

 
  1.  

F. Mustapha, S.M. Sapuan & N. Ismail, “A Computer-Based Intelligent System for Fault Diagnosis of an Aircraft Engine”, to appear in International Journal for Computer Aided Engineering and Software, Emerald Publication.

 
  1.  

Ku Mohd. Noh and Shattri Mansor, 2002, Generation of DEM from SAR Interferometry, The Malaysian Surveyor Journal, Vol. 37. No, 1, 43-48

 
  1.  

H Assilzadeh, S. B. Mansor, H.M. Ibrahim, A.R. Mohd Shariff, 2002, An Early Warning System development for Oil Spill: Radar Image Processing Approach, International Journal of Applied Earth Observation and Geoinformation (Submitted)

 
  1.  

H Assilzadeh, S. B. Mansor, H.M. Ibrahim, A.R. Mohd Shariff, 2002, Evaluation of Oil Spill Simulation for the Straits of Malacca Using Remote Sensing and GIS, International Journal of Coastal Engineering (To be submitted)

 
  1.  

H Assilzadeh, S. B. Mansor, H.M. Ibrahim, A.R. Mohd Shariff, 2002, Oil Spill Contingency Planning in the Straits of Malacca, Journal of Environmental Planning and Management (To be submitted)

 
  1.  

A.M.S. Hamouda and S. Sulaiman (Guest Editors).: Recent Advances in Casting Technology, Journal of Materials and Processing Technology  (Special Issue), Elseveir, (2001) (in process).

 
  1.  

A.M.S. Hamouda, (Guest Editor).: Multimedia in Engineering Education and Training,Journal of Computers & Education (Special Issue), Elsevier Publisher (2001 with the Editor in Chief).

 
  1.  

E-Mahdi, B.B. Sahari, A.M.S. Hamouda and Y. A. Khalid.:  An Experimental Investigation on crushing Behaviour of Filament Wound Laminated Cone-Cone Intersection Composite Shells, Journal of Composite Structures, vol. 51, 2001,  211-219.

 
  1.  

R. Sinha, Q.N. Usmani & B.M. Taib, “Phenomenological Lambda-Nuclear Interactions”, Physical Review C66 (2002), article 024006.

 
  1.  

A. Kilicman, “A Comparison on the Commutative Neutrix Products of Distributions”, Journal of Mathematical & Computational Applications, 8 (3) (2003) 343-351.

 
  1.  

A. Kilicman, “On the Commutative Neutrix Products of Ultradistributions and Semigroups”, to appear in International Journal of Applied Mathematics.

 
  1.  

A. Kilicman, Brian Fisher & Bijana Jolevsaka-Tuneska, “On Defining the Incomplete Gamma Function”, to appear in Integral Transform & Special Functions.

 
  1.  

A. Kilicman, Brian Fisher & Serpil Pehlivan, “Some Commutative Neutrix Convolutions of Functions and Distributions”, to appear in International Journal of Applied Mathematics.

 
  1.  

A. Kilicman & Brian Fisher, “On the Fresnel Integral and the Convolution”, submitted for publication.

 
  1.  

Paridah Md Tahir & O.C. Musgrave. (2002). Chemical properties of bark extracts from Rhizophora mucronata. Holzforschung (submitted).
  1.  

Paridah Md Tahir & O.C. Musgrave. (2002). Cold-setting wood adhesives from R.mucronata extracts. Wood Sci. Journal of Tropical Forest Products (submitted) 18pp.
  1.  

Paridah Md Tahir, O.C. Musgrave & Zaidon Ashaari. (2002). Determination of Polyphenolic Content of Bark Extracts for Wood Adhesives. Holzforschung Vol. 56 No. 3: 267-272.

 
  1.  

R. Wirza, M.S. Bloor & J. Fisher, ‘Inspection Strategies for Complex Curved Surfaces Using CMM’ in Lecture Notes in Computer Science 2331, (Springer-Verlag, 2002) pp 184-194.

 

 

 

JOURNAL (NATIONAL)

 

1.   

S.M Sapuan and E.S. Zainuddin, Fibre orientation of short fibre reinforced injection moulded thermoplasti composites, Research and Development at Universiti Putra Malaysia: Creating New Frontiers of Innovative Research, First Edition, 2002, to be published by Research Management Center, UPM, submitted

2.   

Amhamed Saffor, Abdul Rahman Ramli & Kwan-Hoong Ng, “A Comparison of JPEG and Wavelet Compression Applied to CT Images”, to appear in Pertanika Journal of Science & Technology, 11 (1) (2003).

 

3.   

Khairulnizam Samsudin, Abdul Rahman Ramli, Ismail Mat Yusoff, “HSS16: A Hardware Simulator Software for Persona 16, Jurnal Teknologi D (Electronics, Control, Telecommunications & Information Technology, UTM) 36 (2002).

 

4.   

Lawan Ahmed Mohammed, Abdul Rahman Ramli, Mohamed daud  & V. Prakash, “An Authentication Protocol for Mobile Cellular Network”, Malaysian Journal of Computer Science, 15 (1) (2002).

 

5.   

Syed Abdul Rahman Al-Haddad, Abdul Rahman Ramli, Abdul Azim Abdul Ghani, Rusli Hj. Abdullah, “Rekabentuk Sistem Pendaftaran Berasaskan Faksimili”, Jurnal Teknologi Maklumat, UTM, 13 (2) (2001), 88-99.

 

 

6.   

S Alireza, M Shattri, H Abdel Magid, S. Harwant, M Elsadig, W Rahmita, 2002, Numerical Simulation of Human Femur Bone in Total Hip Replacement: The Appropriate Element Type, Medical Journal Malaysia, Vol. 57, 24-28

 

7.   

H. Zainuddin, “Intertwining Topology & Geometry with Group Theory in Quantization”, Science Putra 10 (2) (2002), 7-8.

 

 

 

 

 

 

 

 

 

 

CONFERENCE PROCEEDINGS

 

  1.  

M.S.D Jacob, S.M. Sapuan and M. Hameedullah, A review of the use of ceramic-matrix composites in engineering components, Proceedings of the Manufacturing Engineering, Automation and Robotics Conference, The Second World Engineering Congress, Kuching, Sarawak, 22-25 July 2002, pp. 291-294, ISBN 967-960-135-8.

 
  1.  

S.M Sapuan and A. Norazmah, Development of a web-based learning and teaching module, Iranian Journal of Engineering Science and Technology, 2002.

 
  1.  

S.Basri, S.M. Sapuan and F.K. Chong, Proceedings of Annual Workshop on Research Schoolarship of National Science Fellowship, 2-3 October 2000, Kuala Lumpur, ITMA Publication, ISBN 967-960-105-6.
  1.  

E.S. Zainuddin and S.M. Sapuan, a proposed experimental investigation of fibre reinforced injection moulded thermoplastic composites, Proceedings of National Symposium on Polymer Materials 2000, Penang, Malayisa, 1-2 June 2000, pp. 224-228, Published by Universiti Sains Malaysia
  1.  

Lawan Ahmed & Abdul Rahman Ramli, “Strategic Analysis of Virtual Learning Programs”, International Internet Economy & Business Conference (IEB2002), Pan Pacific Hotel, Kuala Lumpur, 17-18 September 2002.

 
  1.  

Hanan H.A. Adlan, Abdul Rahman Ramli, Shattri Mansor & Bachok Taib, “Rough Sets Foundation for Complex Images: A Hybrid Approach to Pattern Recognition”, Second IASTED International Conference on Visualization, Imaging and Image Processing (VII) 2002, Malaga, Spain, 9-12 September 2002.
  1.  

Shaiful Jahari Hashim, Khairulmizam Samsudin & Abdul Rahman Ramli, “Bridging Digital Divide in the Developing Countries with Linux”, Open Source Linux Conference, Universiti Perguruan Sultan Idris, The Mines, Kuala Lumpur, 6-7 August 2002
  1.  

Abdul Rahman Ramli, Ahmed Abdusalam, Nor Kamariah Noordin & Md Liakot Ali, “Evaluation of Power Line Communication Performance in CEBus Protocols”, Second World Engineering Congress (WEC 2002), Kuching, Sarawak, 22-25 July 2002.
  1.  

Lawan Ahmed Mohamed, Abdul Rahman Ramli, V. Prakash & Mohamed Daud, “Building Secure Transactions with Smart Cards”, Second World Engineering Congress (WEC 2002), Kuching, Sarawak, 22-25 July 2002.

 
  1.  

Asaad A.Y. Malik Abusin, M. Nuzrin, Abd Rahman Ramli, B. Mohd Ali & V. Prakash, “VoIP Traffic Analysis and Codec Selection for Performance Checking and QoS Testing”, Second World Engineering Congress (WEC 2002), Kuching, Sarawak, 22-25 July 2002
  1.  

Mior Mohd Hadafi A. Zawahir, Ahmad Rodzi Mahmud, Abdul Rashid Mohamed Shariff, Abd Rahman Ramli, Shattri Mansor & Nordin Ahmad, “Framework for the Development of Interactive Visualization of Flood Monitoring”, Second World Engineering Congress (WEC 2002), Kuching Sarawak, 22-25 July 2002.

 
  1.  

Ahmed Abdussalam, Abd Rahman Ramli, Nor Kamariah Nordin & Md Liakot Ali, “Real Time Data Acquisition & remote Controlling Using World Wide Web”, Second Student Conference on Research & Development (SCOReD 2002), Shah Alam, 16-17 July 2002
  1.  

S.Y. Koay, Abd Rahman Ramli, Y.P. Lew, V. Prakash & R. Ali, “A Motion Region Estimation Technique for Web Camera Application”, Second Student Conference on Research & Development (SCOReD 2002), Shah Alam, 16-17 July 2002.

 
  1.  

Qussay A. Salih & Abd Rahman Ramli, “Multi-Scale Zooming of Medical Image Using Bicubic Filter”, Second Student Conference on Research & Development (SCOReD 2002), Shah Alam, 16-17 July 2002.

 
  1.  

Y.P. Lew, Abd Rahman Ramli, S.Y. Koay, R. Ali & V. Prakash, “A Hand Segmentation Scheme Using Clustering Technique in Homogeneous Background”, Second Student Conference on Research & Development (SCOReD 2002), Shah Alam, 16-17 July 2002.

 
  1.  

Abdul Aziz Al-Naqeeb, Abd Rahman Ramli, Ramlan Mahmood & Razali Yaacob, “Colour Recognition Using Back Propagation Neural Network & RGB Values”, International Conference on Artificial Intelligence in Engineering & Technology (ICAIET 2002), UMS, Kota Kinabalu, Sabah, 17-18 June 2002.

 
  1.  

Saffor, Abd Rahman Ramli, K.H. Ng & D.J. Dowsett, “The Use of Low and High Contrast Test Object for Quantification the Effect of Lossy Compression on Computed Tomography Images”, BioMed 2002, Universiti Malaya, 5-8 June 2002.

 
  1.  

Saffor, Abd Rahman Ramli, K.H. Ng & D.J. Dowsett, “Objective and Subjective Evaluation of Compressed Computed Tomography (CT) Images, BioMed 2002, Universiti Malaya, 5-8 June 2002.

 
  1.  

Ahmed Abdusalam & Abd Rahman Ramli, “Web-Based Control Device”, 27th Asian Info-Communication Council (AIC) Conference, Chiangmai, Thailand, 20-24 May 2002.

 
  1.  

Hanan H.A. Adlan, Abd Rahman Ramli, Shattri Mansor & Bachok Taib, “Prototype Architecture for Image Recognition in Complex Environments”, Third Malaysian Remote Sensing and GIS Conference & Exhibition, Kuala Lumpur, 8-9 April 2002.

 
  1.  

Ahmed Wathik Naji, Abd Rahman Ramli, Syed Abdul Rahman & Mohd Laikot Ali, “A Fingerprint Database Classification Using Template Matching Technique”, Third Malaysian Remote Sensing and GIS Conference & Exhibition, Kuala Lumpur, 8-9 April 2002.

 
  1.  

M. Yusof Sulaiman, Khalid Osman, Mahdi Abd Wahab, Azmi Zakaria & Zainal Abidin Sulaiman, “Voltage Regulator for Photovoltaic Systems”, Proceedings of the Second World Engineering Congress, Sarawak, July 2002, 93-97.

 
  1.  

M. Yusof Sulaiman, Khalid Osman, Mahdi Abd Wahab, Azmi Zakaria & Zainal Abidin Sulaiman, “Photovoltaic Driven dc Refrigerator”, Proceedings of Postgraduate Seminar, UPM, July 2002, 70-74.

 
  1.  

Rosdi Ibrahim & M. Yusof Sulaiman, “Influence of Temperature on the Properties of the 316L Stainless Steel Sintered Specimen Produced by Metal Injection Molding Technique”, XIX Regional Conference on Solid State Science & Technology, Sarawak, 30 Oct – 1 Nov 2002.

 
  1.  

Rosdi Ibrahim & M. Yusof Sulaiman, “The Effect of Injection Pressure and Temperature on the Properties of the Sintered Stainless Steel (SUS 316L) Specimen Produced by Metal Injection Molding Technique”, Second World Engineering Congress, Sarawak, 22-25 July 2002.

 
  1.  

M.R. Osman, M.Y. Ismail, N. Ismail, M.Y. Rosnah, S.M. Sapuan & C.F. Tan, “The Study of the Effect of the Implementation of ISO:2000 in Manufacturing Companies”, Third International Conference on Quality and Reliability (ICOR), Melbourne, Australia, 28-30 August 2002.

 
  1.  

N. Ismail, C.F. Tan, S.V. Wong, M.R. Osman & S. Sulaiman, “Ruled-Based Feature Extraction & Recognition from STEP File”, Proceedings of SCOReD 2002, July 16-17, Shah Alam, Selangor.

 
  1.  

N. Ismail, S.S. Tai & Z. Leman, “Improving Productivity & Efficiency of a Vehicle Seat Assembly Line in a Manufacturing Company”, Proceedings of SCOReD 2002, July 16-17, Shah Alam, Selangor.

 
  1.  

N. Ismail & C.F. Tan, “Overview of Feature Technology and Applications”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

Razali Samin, Napsiah Ismail, Shamsuddin Sulaiman, Roslizah Ali & Md. Mahmud Hassan, “Robot Manipulation Trajectory Planning for Complex Positions”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

M.S. Salsidu, N. Ismail, H. Omar & Rosely Ab. Malik, “APC a New Feature in Semi Auto Operation Machine (SOAM) of H-Ometer”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

Ahmad Yusairi Bani Hashim, Napsiah Ismail, Megat Hamdan Megat Ahmad & A. Maged Hamouda, “Computing Technique for Manipulator Positioning”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

C.F. Tan, N. Ismail, M.R. Osman, S.V. Wong & S. Sulaiman, “Development of Feature Recognition System for Machined Parts”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

M.K.A. Ariffin, S. Sulaiman, M.M. Hamdan, Z. Leman & Napsiah Ismail, “Design Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

J.Y. Tan, S.V. Woon, A.M.S. Hammouda, N. Ismail & M.R. Osman, “A Review on the Application of Fuzzy Logic in Machining Process”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

T.S. Mujber, A.M.S. Hamouda, M.R. Osman, N. Ismail & S.V. Wong, “Development of Wireless PC-Controlled Mobile Robot System”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

M.R. Osman, M.Y. Ismail, Napsiah Ismail, R.M. Yusuff & C.F. Tan, “A Comparative Study of ISO 9000 and TQM Implementation”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

C.T. Wong, S. Sulaiman, Napsiah Ismail & A.M.S. Hamouda, “Design & Simulation of Plastic Injection Moulding”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

Megat Johari MMN, Abang Abdullah Abang Ali, Mohd Rasid Osman, Mohd Saleh Jaafar, Desa Ahmad, Rosnah Mohd Yusof & Napsiah Ismail, “Malaysian Engineering Education at a Crossroad”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

Rosnah Mohd Yusoff, M.S.M. Amin & Napsiah Ismail, “Ethical Values of UPM Engineering Students and Islamic Ethics”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

Megat Johari Megat Mohd Noor, Mohd Rasid Osman, Rosnah Mohd Yusof, Napsiah Ismail, “Gender Distribution at the Faculty of Engineering, Universiti Putra Malaysia”, Proceedings of Second World Engineering Congress, Kuching, Sarawak, July 22-25, 2002.

 
  1.  

Rahman Wagiran, Mohd Rasid Osman, Megat Johari Megat Mohd Noor, Nor Kamariah Noordin, Desa Ahmad, Abdul Ghani Liew Abdullah, Napsiah Ismail & Nasri Sulaiman, “Quality and ISO9001 in Engineering Tertiary Education, Bengkel ISO9001, 15-18 Julai 2002, Fakulti Kejuruteraan.

 
  1.  

Megat Johari Megat Mohd, Rasid Osman, Nor Kamariah Noordin, Rosnah Mohd Yusuff, Napsiah Ismail (eds.), Proceedings of Malaysia Incorporated Engineers and Engineering Technicians Study Team Workshop, (Universiti Putra Malaysia, 2002).