EDUCATIONAL PUBLICATION 2003

	JOURNALS (INTERNATIONAL)
	Mohd. Zobir Hussein, Asmah Hj Yahaya, Mohd Shamsul Hairi Mohd Salleh, Taufiq Yap and Jacqueline Kiu, “Acid Fuchsin-interleaved Mg-Al-layered Double Hydroxide for the Formation of an Organic-inorganic Hybrid Nanocomposite”, Materials Latters.
	Zulkarnain Zainal, Lee Kong Hui, Mohd. Zobir Hussein, Yun Hin Taufiq-Yap and Irmawati Ramli, “Photodegradation of Methylene Blue using Sol-Gel Derived TiO2”, Research Journal of Chemistry and Environment, Volume 7(3) page 31-37 (2003).
	Y.H. Taufiq-Yap, K.P. Tan, K.C. Waugh, M.Z. Hussein, I. Ramli, and M.B. Abdul Rahman, “Bismuth-Modified Vanadyl Pyrophosphate Catalysts”, Catalysis Letters Volume 89, No. 1–2, (2003) 87-93.
	Asmah Hj Yahaya, Mohd. Zobir Hussein and Wong Song Seh, “Ion Exchange Study of Carbonate, Nitrate and Dioctyl Sulfosuccinate with Anthraquinone-2-sulphonate Encapsulated in Inorganic Nano Layered Structures”, Journal of Physics and Chemistry of Solids, Volume 3(2) page 64-75 (2003).
	Zainal, Z., N. Saravanan, A. Kassim, M.Z. Hussein and W.M.M. Yunus, “Effect of Time on Electrodeposition of Tin Selenide Thin Films from Aqueous Solution”, Greenwich, Journal of Science and Technology, Volume 3(2) page 64-75 (2003).
	Z. Zainal, S. Nagalingam, A. Kassim, M.Z. Hussein and W.M.M. Yunus, “Tin Selenide Thin Films Prepared Through Combination of Chemical Precipitation and Vacuum Evaporation Technique”, Materials Science, Volume 21(2) page 225-233 (2003).
	Zulkarnain Zainal, Ali Jimale Ali, Anuar Kassim and Mohd. Zobir Hussein, “Electrodeposition of Tin Selenide Thin Film Semiconductor: Effect of the Electrolytes Concentration on the Film Properties”, Solar Energy Materials and Solar Cells, Volume 79, 125-132 (2003).
	A. Kassim, C.G. Joseph, Z. Zainal, M.Z. Hussein, J. Haron and A.H. Abdullah, “Surface Area and Porosity Studies of Activated Carbons Prepared From Oil Palm Shells (Elaeis Guineensis) Using Physical and Chemical Activators, Such as CO2, H3PO4, K3PO4 and KOH”, Asian Journal of Science, Technology and Development (AJSTD), Volume 208 (1), page 149-158 (2003).
	Mohd Zobir bin Hussein, Zaemah binti Jubri, Zulkarnain Zainal, Asmah Hj. Yahya, “Pamoate-Intercalated Zn-Al Layered Double Hydroxide for the Formation of Layered Organic-Inorganic Hybrid Intercalate”, Materials Science.
	L.H. Boon, K.A. Abbas, S.M. Sapuan, M.M.H.M. Ahmad, S. Sulaiman and S.I.S. Shahruddin, “A Development and Comparative Study of Two Rapid Prototyping Processes of an Automotive Composite Pedal Box System”, Ciencia & Technologia dos Materiais, 15, no. 1-2, pp. 5-8 (2003).
	M.A. Maleque, H.H. Masjuki and S.M. Sapuan, “Vegetable Based Biodegradable Lubricating Oil Additives”, Industrial Lubrication and Tribology, 55, no. 3, pp. 137-143 (2003).
12.	Amhamed Saffor, Abdul Rahman Ramli and Kwan-Hoong Ng, “Wavelet-Based Compression of Medical Images: Filter-Bank Selection and Evaluation”, Australasian Physical and Engineering Sciences in Medicine, Volume 26, Number 2, pp. 38-43, 2003.
	N.Ismail, N. Abu Bakar and A.H.Juri, “Recognition of Cylindrical-based and Conical-based Features Using Edge Boundary Classification Technique” Journal of Materials Processing Technology ,No. MSH705.
	F.Mustapha, S.M Sapuan, N. Ismail and A. Samsuri, “A Computer Based Intelligent System for Fault Diagnosis of an Aircraft Engine, Engineering Computation: International Journal for Computer Aided Engineering Software, 2003
	S.M. Sapuan, M.Y. Hassan, N. Ismail and M. Johari, “Development of Polymeric-Based Composite Holy Qur’an Stand (Rehal)”, Al-Nahdah Journal of the Regional Islamic Da’wah Council of South East Asia and Pacific, 22, no.1, pp.37-38, 2003.
	Sapuan S.M, Maleque M.A, Suddin N. and N. Ismail, “A Conceptual Design of Polymetric-Based Composite Automotive Bumper System”, Polymer Material, 2003.
	Ibrahim Aref, Abd Rahman Ramli, Mohamed Derahman, Syed Al-Haddad, "Audio on Demand System Using RTP Protocol Based on JMF API", WSEAS Transaction on Communication Journal, Issue 3, Volume 2, July 2003, ISSN 1109-2742.
18.	H. Assilzadeh, S. B. Mansor, H.M. Ibrahim, A.R. Mohd Shariff, “An Early Warning System Development for Oil Spill: Radar Image Processing Approach”, International Journal of Applied Earth Observation and Geoinformation, 2003.
19.	H. Assilzadeh, S. B. Mansor, H.M. Ibrahim, A.R. Mohd Shariff, “Evaluation of Oil Spill Simulation for the Straits of Malacca Using Remote Sensing and GIS”, International Journal of Disaster Prevention and Management 2003.
20.	H Assilzadeh, S. B. Mansor, H.M. Ibrahim, A.R. Mohd Shariff, “Decision Support System for Oil Spill Contingency Planning in the Straits of Malacca”, International Journal of Decision Support Systems, 2003.
21.	L. Billa, Mansor, S.B., Mahmud, A.R., Ibrahim, H.M., Tan, C.K., “Spatial Decision Support System for Tropical Fish Forecasting with ArcView as DSS Generator”, ICES Journal of Marine Science, 2003
22.	S.A. Asgari, S.B. Mansor, A.M. Hamouda, E.Mahdi, R. Wirza, H.Singh, “Natural Fiber Reinforced Composites for Femoral Component of Total Hip Arthroplasty”, Journal of Mechanics in Medicine and Biology (submitted), 2003.
23.	S.A. Asgari, S.B. Mansor, A.M. Hamouda, E.Mahdi, R. Wirza, H.Singh, “Finite Element Modelling of a Generic Stemless Hip Implant Design in Comparison with Conventional Hip Implants”, Journal of Finite Element in Analysis and Design, 2003.
24.	Wong Tai Hong, Shattri Mansor, Muhammad Radzali Mispan, Noordin Ahmad, “Land Cover Classification Using Rule Based Technique”, GIS Development, 2003.
25.	S. Zahra Pourvakhshouri and Shattri Mansor, “Decision Support System in Oil Spill Cases”, International Journal of Disaster Prevention and Management, Vol. 12, Number 3, p217-p221, 2003.
26.	Syarifah N.S.O, Jeber F.K., and Mansor S.B., “GIS/RS for Landslides Zonation in Pos Slim-Cameron Highlands District Peninsular Malaysia”, An International of Disaster Prevention and Management, Vol.13, No. 1
	Billa L., Shattri B.M., Rodzi A.M., Ibrahim M.M, Tan C.K, “Spatial Decision Support System for Tropical Fish Forecasting with ArcView as DSS Generator”, ICES, International Journal.
	S. V. Wong and A.M.S. Hamouda, “The Development of an Online Knowledge-based Expert System for Machinability Data Selection”, Knowledge-Based Systems International Journal, Vol. 16, No.4, (2003), pp. 215-229.
	C.L. Chan, Y.A. Khalid, B.B. Sahari and A.M.S. Hamouda, “Corrugated Web Beams Under Bending”, Engineering Structural International Journal (in press), 2003.
	A.M.S. Hamouda et al, “Springback in V-bending: A Finite Element Approach”, International Journal of Production and Materials Technology, (in press), 2003.
	O. Alkalus Elhadi, Mahdi E, and A.M.S. Hamouda, B.S Barkawi, “Ellipticity Ratio Effects in the Energy Absorption of Axially Loaded Composite Tubes”, Applied Composite Materials International Journal, Vol. 10, No. 6, 2003, pp. 339-363.
	S.A. Asgari, A.M.S. Hamouda, S. Mansor, H. Singh, E. Mahdi, R. Wirza, B.D. Prakash, “Finite Element Modelling of a Generic Stemless Hip Implant Design in Comparison with Conventional Hip Implants”, International Journal of Finite Element in Analysis and Design, (accepted), Dec. 2003.
33.	Rowshon M.K., M.S.M Amin, Sarwar M.J and T.J Deepak, “Rice Irrigation Water Management using GIS: A Case Study of Tanjung Karang Rice Irrigation Scheme, Malaysia”, Journal of Applied Irrigation Science, Vol.38 No.1 April 2003, pp 57-72 Verlag Publication Germany
	Deepak T.J. and M.S.M Amin, “Dominance of GIS in Developing a Database for Precision Farming”, Journal Hum. Ecol., 14(5): 329-335(2003) Kamla-Raj.
35.	S.V. Wong, A.M.S. Hamouda, “Web-based Machinability Handbook for Metal Cutting Data Selection”, International Journal of Computer Applications in Technology, 17(2), 2003, 110-120 (listed in ISI SCI).
36.	S.V. Wong, A.M.S. Hamouda, “The Development of an Online Knowledge-based Expert System for Machinability Data Selection”, Knowledge-Based Systems, 16(4), 2003, 215-229 (listed in ISI SCI).
37.	“Machinability Data Representation with Artificial Neural Network”, Journal of Material Processing Technology, 138(1-3), 2003, 538-544 (listed in ISI SCI)
38.	S. Harnen, R.S. Radin Umar, S.V. Wong, W.I. Wan Hashmi, “Motorcycle Crash Prediction Model for Non-Signalized Intersections”, Journal of International Association of Traffic and Safety Sciences, 27(2), 2003, 58-65.
39.	S. Harnen, R.S. Radin Umar, S.V. Wong, W.I. Wan Hashmi, “Predictive Models for Motorcycle Accidents at Three-Legged Priority Junctions”, Journal of Traffic Injury Prevention, 4(4), 2003, 363-369.
40.	J.S. Yeap, J.L. Lim, T.Y. Pang, S.V. Wong, R.S. Radin Umar, T.H. Law, “Patient Perception on the Effectiveness of Shin Pads in Reducing the Severity of Injuries to the Tibia Following Motorcycle Accidents”, International Medical Research Journal 6(1), 2003, 41-44.
41.	Mohamed Ahmed Siddig, Zainul Abidin Hassan, Hishamuddin, Zainuddin, Wan Mahmood Mat Yunus, “Modeling of the Optical Funtions for Multi-Layer Thin Film”, Suranaree J. Sci. & Tech. 10 (1) (2003) 40-46.
	O.M.S Alkoles, E. Mahdi, A.M.S Hamouda and B.B Sahari, “Ellipticity Ratio Effects in the Energy Absorption of Axially Crushed Composite Tubes”, Applied Composite Materials 10: 339-363, 2003.
	E. Mahdi, A.M.S Hamouda, B.B Sahari and Y.A Khalid, “On the Collapse of Cotton/Epoxy Tubes under Axial Static Loading”, Applied Composite Materials 10: 67-84, 2003.
	E. Mahdi, A.M.S Hamouda, B.B Sahari and Y.A Khalid, “Effect of Residual Stresses in a Filament Wound Laminated Conical Shell”, Journal of Materals Processing Technology 6642 (2003) 1-6.
	E. Mahdi, A.M.S Hamouda, B.B Sahari and Y.A Khalid, “Experimental Quasi-Static Axial Crushing of Cone-Tube-Cone Composite System”, Composite: Part B 34 (2003) 285-302.
	E. Mahdi, A.M.S Hamouda, B.B. Sahari and Y.A. Khalid, “Effect of Hybridisation on Crushing Behaviour of Carbon/Glass Fibre/Epoxy Circular-Cylindrical Shells”, Journal of Materials Technology 132 (2003) 49-57.
	E. Mahdi, A.M.S. Hamouda, B. B. Sahari and Y. A. Khalid, “Effect of Hybridisation on Crushing Behaviour of Carbon/Glass Fibre/Epoxy Circular–Cylindrical Shells”, Journal of Materials Processing Technology, Volume 132, Issues 1-3, 10 January 2003, Pages 49-57.
	C. K. How, A.M.S. Hamouda, M. M. Hamdan and R. S. Radin Umar, “The Crashing Behaviour of Motorcycle Basket Under Impact Loading”, Journal of Materials Processing Technology, Volume 132, Issues 1-3, 10 January 2003, Pages 1-8.
	E. Mahdi, A.M.S. Hamouda, B.B. Sahari and Y. A. Khalid, “Experimental Quasi-Static Axial Crushing of Cone–Tube–Cone Composite System”, Composites Part B: Engineering, Vol. 34, No.3, pp. 285-302, 2003.
	A. A. S. Abosbaia, E. Mahdi, A.M.S. Hamouda and B. B. Sahari, “Quasi-Static Axial Crushing of Segmented and Non-Segmented Composite Tubes”, Composite Structures, Vol. 60, No. 3, (2003), pp 231-365.
	E-Mahdi, A.M.S. Hamouda, B.B. Sahari, and Y. A. Khalid, “Effect of Residual Stresses on the Fabrication of Filament Wound Laminated Cylindrical and Conical Composite Shells”, Journal of Materials Processing Technology, (in press) 2003.
	M. Jolgaf, A.M.S. Hamouda, S. Sulaiman and M. M. Hamdan, “Development of CAD/CAM System for Closed-Die Forging Process”, Journal of Materials Processing Technology, (in press), 2003.
	S.V. Wong, A.M.S. Hamouda, “Machinability Data Representation with Artificial Neural Network”, Journal of Materials Processing Technology, Vol. 138, 2003, 538-544.

	NATIONAL JOURNALS
1.	Zuliskandar Ramli, Zobir Hussein, Asmah Yahaya and Zulkifli Jaafar, “Chemical Analysis of Prehistoric Pottery Sherds Found at Gua Angin, Kota Gelanggi Complex, Jerantut, Pahang Malaysia”, Jurnal Arkeologi Malaysia, Volume 14 (2001) 1-11 (late delivery).
2.	Chen Soong Der, Abdul Rahman Ramli, “Contrast Enhancement Using Recursive Mean-Separate Histogram Equalization for Scalable Brightness Preservation”, Cyberscape Journal, Multimedia University, Cyberjaya, April 2003
3.	Amhamed Saffor, Abdul Rahman Ramli, Kwan-Hoong Ng, “A Comparison of JPEG and Wavelet Compression Applied to CT Images”, Pertanika Journal of Science and Technology, Vol. 11, No. 1, 2003.
4.	Ahmad Yusairi Bani Hashim, Napsiah Ismail, Megat Hamdan Megat Ahmad, Abdel Magid Hamouda and Mohd Rasid Osman, “Application of Soft Computing to Serial Manipulator Kinematic Problems”, Pertanika Journal of Science and Technology, 2003.
5.	C. F. Tan, N. Ismail, M. R. Osman, S. V. Wong and S. Sulaiman, “The Development of Hole Recognition System for Machined Parts”, Pertanika Journal of Science and Technology, 2003.
6.	N.Ismail, N. Abu Bakar and A.H.Juri, “Recognition of Cylindrical-Based Features Using Edge Boundary Technique for Integrated Manufacturing”, Journal of Robotics and Computer Integrated Manufacturing, Feb. 2003.
7.	Ku Mohd. Noh and Shattri B. Mansor, “DEM From Synthetic Aperture Radar Interferometry in the Tropics”, Malaysian Journal of Remote Sensing and GIS, Vol. 3. July 2002.
8.	A. Asmat, S.B. Mansor, M.I. Mohamed and M.R. Mispan, “Estimating Chlorophyll -A Concentration from Remotely Sensed Data in East Coast of Peninsular Malaysia”, GIS Development, Vol. 7, No. 3, 2003.
9.	H. Assilzadeh, S.B. Mansor, H.M. Ibrahim, A.R. Mohd Shariff, “Satellite Image Monitoring and Oil Spill Spill Detection”, GIS Development, Vol. 7, No. 8, 2003.
10.	Ahmad Rodzi Mahmud, Radin Umar Radin Sohadi, Abdul Rashid Mohamed Shariff, Shattri Mansor, “Efficiency of Cartographic Generalisation Algorithm for Automated Collision Diagram”, Journal of The Malaysian Surveyor, (accepted for publication), 2003.
11.	Teoh C.C., Mansor S.B., Mohd. Shariff A.R., Ahmad N., M.R., “Optimum Band Selection for Image Visualization of Multispectral Data”, Journal of The Malaysian Surveyor, Vol. 38, No. 2, p62-68, 2003.
12.	Hanan H. A. Adlan, Abd. Rahman Ramli, Shattri Mansor and Bachok Taib, “Perfomance Analysis of Edge Detection Methods for Macroscopic Images”, KKU Science Journal, Vol 31(3), pp 141-147, 2003.
13.	F.M. Shuaeib, Tan Chee Fai, S.V. Wong, A.M.S. Hamouda, M.M.H. Megat Ahmad, Radin S. Radin Umar, “CAD/CAM of Head-form for Helmet Testing”, Pertanika Journal of Science and Technology , 2003.
14.	J.Y. Tan, S.V. Wong and A.M.S. Hamouda, “Development of Fuzzy Models for Machinability Data Selection of Alloy Steel”, Pertanika Journal of Science and Technology, 2003.
15.	A.B Ibitoye, S.V Wong, R.S Radin Umar, A.M.S Hamouda and T.K Law, “Perception Level of Motorcyclist on Guardrail As Road Safety Barrier”, Malaysian Medical Journal, (accepted), 2003.
16.	Abdul Hakim M.A, S. Said and M.S.M Amin, “Modeling of the Fate and Agrochemical Movement under Controlled Water Table Environment”, Pertanika Journal of Science and Technology 11(2): 145-152 (2003), UPM Press.
17.	Thamer A.M, Megat J.M.M.N, A. Halim G, Badronnisa Y, M.S.M Amin, M.A.M Benzaghta, “Experimental Study on the Friction Loss and Uniformity of Lateral Discharge Along a Manifold”, Journal of IEM, Malaysia, Vol. 64 No2, 2003.