1.
Mohd
Zobir bin Hussein, Asmah Hj Yahaya, Zulkarnain
Zainal, and Loo Hee Kian, Nanocomposite-based Controlled Release Formulation of
an Herbicide, 2,4-dichlorophenoxyacetate Incapsulated in Zinc-aluminium-layered
Double Hydroxide, Science and Technology of Advanced Materials Volume
6, Issue 8, November 2005, pp.
956-962.
2.
Mohd Zobir bin Hussein, Phycilla Lee Chi Ling and Chan Woei Long, Acetobacter xylinum as a shape-directing
agent for the formaton of nano-, micro-sized zinc oxide, Journal of
Materials Science Published online: 1 November 2005.
3.
Zulkarnain
Zainal, Chong Yong Lee, Mohd Zobir Hussein, Anuar Kassim and Nor Azah
Yusof Electrochemical-assisted photodegradation of dye on TiO2 thin
films: investigation on the effect of operational parameters, Journal of
Hazardous Materials, Volume 118 (2005), pp. 197-203.
4.
Zulkarnain
Zainal, Chong Yong Lee, Mohd Zobir Hussein, Anuar Kassim and Nor Azah
Yusof, Effect of supporting electrolytes in electrochemically-assisted
photodegradation of an azo dye, Journal of Photochemistry and Photobiology
A: Chemistry, Volume 172, (2005), pp. 316-321.
5.
Mohd
Basyaruddin Abdul Rahman, Safarini Md Tajudin, Mohd Zobir Hussein, Raja
Nor Zaliha Raja Abdul Rahman, Abu Bakar Salleh and Mahiran Basri, Application
of natural kaolin as support for the immobilization of lipase from Candida
rugosa as biocatalsyt for effective esterification, Applied Clay
Science, Volume 29 (2005), pp. 111-116.
6.
Zulkarnain
Zainal, Lee Kong Hui, Mohd Zobir Hussein, Yun Hin Taufiq-Yap, Abdul
Halim Abdullah and Irmawati Ramli, Removal of dyes using immobilized titanium
dioxide illuminated by fluorescent lamps, Journal of Hazardous Materials, Volume
125 (2005), pp. 113-120.
7.
S.M. Sapuan, M.A. Maleque, M. Hameedullah,
M.N. Suddin and N.
Ismail,
A Note on the Conceptual Design of Polymeric Composite Automotive Bumper
System, Journal of Materials Processing
Technology, 159, no. 1,pp. 145-151, 2005.
8.
S.M. Sapuan, M.S.A.Molla and M.L.
Ali, Conceptual Design of
Composite
Brake Pedal, Suranaree Journal of Science
and Technology, 12, no. 3, pp. 173-177, 2005.
9.
E.S. Zainudin, S.M. Sapuan, S. Sulaiman, M.M.H.M. Ahmad,
Comparison
of Numerical and Experimental Studies of Fibre Orientation of Short Glass Fibre
Reinforced Thermoplastic Composites, Cienci\a
& Technologia dos Materiais, 6,no. 4, pp. 57-60, 2004.
10.
S.M. Sapuan and M.A. Maleque,
Design and Fabrication of Natural
Woven
Fabric Reinforced Epoxy Composite for Household Telephone Stand, Materials and Design, 26, no. 1, pp.
65-71, 2005.
11.
S.S.S. Imihezri. S.M. Sapuan, M.Hamdan and S.Sulaiman, A study on Comparison of V and X
Ribbings for Polymeric Based Composite Automotive Clutch Pedal Using Mould Flow
Analysis Software, Materials and Design,
26, no. 2, pp. 157-166, 2005.
12.
C.Y. Lai, S.M.
Sapuan, M. Ahmad, N. Yahya and K.Z.H.M. Dahlan,
Mechanical
and Electrical Properties of Coconut Coir Fiber-Reinforced Polypropylene
Composites, Polymer-Plastics Technology
and Engineering, 44, no. 4, pp. 619-632, 2005.
13.
S.M. Sapuan, A Conceptual Design of
the Concurrent Engineering
Design
System for Polymeric Based Composite Automotive Pedals, American Journal of Applied Sciences, 2, no. 2, pp. 514 - 525,
2005.
14.
S.M. Sapuan and A. Sharuddin,
Polymeric Composite Industry in
Malaysia,
Sudan Engineering Society Journal,
51, no. 43, pp. 11-17, 2005.
15.
H.B. Lee, S.M.
Sapuan, S. Sulaiman and M.M.H.M. Ahmad, Design
Process
and Rapid Prototyping of a Fibre Reinforced Composite Pedal Box, Sudan Engineering Society Journal, 52,
no. 44, pp. 23-32, 2005.
16.
M.N. Nizam, S.M.
Sapuan, N. Ismail, M.A. Maleque and E. S.
Zainudin,
Total Design of Polymer Composite Automotive Bumper Fascia, Suranaree Journal of Science and Technology, 12, no. 1, pp. 39-45,
2005.
17.
S.M. Sapuan, M.N. Suddin, N. Ismail
and M.A. Maleque, Composite
Product
Development: Case Study in Automotive Bumper Fascia, Journal of Industrial Technology, 14, no. 1, pp. 59-68, 2005.
18.
S.M. Sapuan, M.R. Osman and Y.
Nukman, State of the-art of the
Concurrent
Engineering Technique in Automotive Industry, Journal of Engineering Design, 17, no. 1, 1-15,
2005.
19.
Z. Leman, H.Y. Sastra, S.M. Sapuan, M.M.Hamdan and M.A. Maleque, Study on Impact
Properties of Arenga Pinnata Fibre Reinforced Epoxy Composites, Journal of Applied Technology, 3, no. 1,
2005.
20.
N.M.Z.N.Mohamed, H.Y.Sastra, S.M. Sapuan, N. Ismail and A.B.A.
Hamid,
Manpower Consideration to Reduce Development Time for New Model in Automotive
Industry, American Journal of Applied
Sciences, 2, no.4, pp.763-767, 2005.
21.
M.S.D. Jacob, P.R. Arora, E. Mahdi, S.M. Sapuan and A.G.
Jamaluddin,
The Study of Bauschinger Effect on 6061-T6 Aluminium Alloy, Journal of Applied Technology, 2, no. 2,
pp. 123- 128, 2004.
22.
S. M. Sapuan, M.N.M. Zan, E.S.
Zainudin and P.R. Arora, Tensile
and
Flexural Strengths of Coconut Fibre Reinforced Composites, Journal of Tropical Agriculture, 43, no. 1-2, pp. 67-69, 2005.
23.
M.N.R. Arib, S.M. Sapuan, M.M.H.M. Ahmad, P. Tahir and K.Z.M.
Dahlan,
Mechanical Properties of Pineapple Leaf Fibre Reinforced
Polypropylene
Composite, Materials and Design, 27,
no. 5, pp. 391-396, 2006.
24.
S.M. Sapuan, K.H. Cheng, S.H. Tang
and F. Abas, Total Design and Fabrication of a Cost Effective Portable
Decontamination Shower, Journal of Industrial Technology, 14, no. 1, pp. 77-88,
2005.
25.
W.P. Lee, M.R. A. Kadir, M.S. Jaafar, S.M. Sapuan and A.A.A. Ali,
Performance
Comparison Between Structural Element of Building Systems in Malaysia, American Journal of Applied Sciences, 2,
no. 5, pp. 1014-1024, 2005.
26.
S.M. Sapuan, Concurrent Design and
Manufacturing Process of
Automotive
Composite Components, Assembly Automation,
25, no. 2, pp. 146-152, 2005.
27.
H.Y. Sastra, J.P. Siregar, S.M. Sapuan and M.M. Hamdan, Tensile
Properties
of Arenga Pinnata Fibre Reinforced Epoxy Composites,
Polymer-Plastics Technology and Engineering, 45, no. 1, pp.1-8,
2006.
28.
H.Y. Sastra, J.P. Siregar, S.M. Sapuan, Z. Leman and M.M. Hamdan, Flexural Properties of Arenga pinnata Fibre Reinforced Epoxy Composites, American Journal of Applied Sciences,
Special Iissue, pp. 21-24, 2005.
29.
S.A. Mutasher, S.M. Sapuan, A.M.S. Hamouda and B.Sahari, Torsion Capacity of a Hybrid
Aluminium Glass Fibre Composite Hollow Shaft, American Journal of Applied Sciences, Special Issue, pp. 67-71,
2005.
30.
N.M.Z.N.Mohamed, H.Y.Sastra, S.M. Sapuan, N. Ismail and A.B.A.
Hamid,
Material Consideration to Reduce Development Time For New Model in Automotive
Industry, Journal of Applied Technology,
3, no. 1, 2005.
31.
S.M. Sapuan, New Sources of Fiber, Automotive Engineering
International, 113, no. 11, pp. 76,
2005.
32.
S.M. Sapuan, Agicultural Based
Fibre Composites, Journal of
Applied Technology, 3, no. 1, 2005.
33.
A Awaluddin, A.B. Nasrin, Y.M. Choo, N.M. Adam
and S.M. Sapuan, Development of
Gasification System Fuelled with Palm Oil Fibres and Shells, American Journal of Applied Sciences,
Special Issue, pp. 72-76, 2005.
34.
M. Harimi, M. Megat, S.M. Sapuan, and A. Idris, Numerical
Analysis
of Emission Component from Combustion of Palm Oil Wastes, Biomass and Bioenergy, 28, no. 3, pp.
339-345, 2005.
35.
Rahman, A., Yahya, A., Zohadie, M., Ahmad, D. and Ishak,
W. Design and Development of a
Segmented Rubber Tracked Vehicle for Sepang Peat Terrain in Malaysia, Int. J. Vehicle Design (IJVD), 2005
36.
A. Rahman, A. Yahya, M. Zohadie, W. Ishak and
D. Ahmad. Simulated Steerability of a
Segmented Rubber Tracked Vehicle During Turning on Sepang Peat Terrain in
Malaysia, Int. Journal of Heavy Vehicle Systems, Vol. 12, No. 2, pp.
139-168, 2005
37.
Rahman, A., Yahya, A., Zohadie,
M., Ishak, W. and Ahmad, D.
Process Involved in the Design of a Prototype Segmented Rubber Track for
Sepang Peat in Malaysia. Int. J.
Vehicle Design (IJVD), Vol.38, No. 4,
pp 347-379, 2005.
38.
Sahr Marvin Bockari-Gevao, Wan
Ishak, Azmi Yahya, Chan Chee Wan, Analysis of Energy Consumption in Lowland
Rice-Based Cropping System of Malaysia.
Songklanakarin. Journal of Science and Technology, Vol. 27, No. 4. July-August.
pp. 819-826, 2005.
39.
Qussay A. Salih, Abdul Rahman Ramli, Rozi
Mahmud and Rahmita Wirza, Brain White And Gray Matter Anatomy Of MRI
Segmentation Based On Tissue Evaluation, Medscape General Medicine e-Journal,
Volume 7, No. 2, New York, September
2005.
40.
R. A. Mokhtar, S. Khatun, A. Borhanuddin and A.
Ramli, Authentication Model Using Bluetooth-enabled Mobile Phone, Journal
of Computer Science, Volume 1 (2), New York, USA, , pp. 200-203, January
2005.
41.
R. A. Mokhtar, S. Khatun, A. Borhanuddin and A.
Ramli, Application of Mobile Phone for Laptop Security, Journal of Applied
Science, Volume 5 (2), Pakistan, 2005, pp. 215-219.
42.
N.M.Z.N. Mohamed, H.Y.Sastra, S.M.Sapuan, N.Ismail and A.B.A. Hamid “Manpower
Consideration to Reduce Development Time for New Model in Automotive Industry” American Journal of Applied Sciences 2(4),
763-767, 2005.
43.
N. Ismail, N. Abu Bakar and A.H. Juri “Recognition of Cylindrical and Conical Features using Edge Boundary
Classification”, International Journal of Machine Tools and
Manufacture, Volume 45, Issue 6,
649-655, 2005.
44.
M.H. Al-Mansoori, M.S.Z. Abidin, A.W.
Naji, A.K. Zamzuri, F.R.M. Adikan and M.A.
Mahdi, “35-channel multiwavelength
Brillouin-Erbium fiber laser utilizing fiber loop mirror technique”, Jap. J. Appl. Phy. vol. 44,
no. 5A, pp. L190 – L192, 2005.
45.
T.A. Haddud, M.H. Al-Mansoori, A.K.
Zamzuri, S. Shaharudin, M.K. Abdullah and M.A. Mahdi, “24-line of
Brillouin-Erbium fiber utilizing Fabry Perot cavity in L-band”, Microw. Opt. Technol. Lett., vol. 45,
no. 2, pp. 165-167, 2005.
46.
M.H. Al-Mansoori, M.K.A. Rahman, F.R.M.
Adikan and M.A. Mahdi, “Widely tunable linear cavity
multiwavelength Brillouin-Erbium fiber laser”, Opt. Exp., vol. 13, no. 9, pp. 3471-3476, 2005.
47.
A. Ahmad, M.A. Mas Izyani, A.K. Zamzuri,
F.R.M. Adikan, S-J. Sheih and M.A. Mahdi, “Experimental
validation of OSNR enhancement utilizing hybrid Raman/Erbium fiber amplifiers”,
Microw. Opt. Technol.
Lett., vol. 45, no. 4, pp. 333-335, 2005.
48.
M.H. Al-Mansoori, M.K. Abdullah, B.M. Ali, and M.A. Mahdi, “Hybrid Brillouin/Erbium
fibre laser in a linear cavity for multi-wavelength communication systems”, Opt. Laser Technol., vol. 37, no. 5, pp.
387-390, 2005.
49.
F. Abdullah, A.S.M. Noor, M.A. Mahdi, M.Z.
Jamaludin, K. Dimyati and M.K. Abdullah, “Simultaneous dual wavelength lasing
of an Erbium-doped fiber laser over wide spectrum range by intracavity loss
optimization”, Opt. Laser Technol., vol.
37, no. 8, pp. 638-641, 2005.
50.
M.H. Al-Mansoori, S. Saharudin, H.A.
Rashid, M.A. Mahdi and M.K. Abdullah, “Characterization of
multiwavelength Brillouin/Erbium fiber laser based-on a linear cavity
configuration”, Appl. Opt., vol. 44,
no. 14, pp. 2827-2831, 2005.
51.
K.A. Khairi, F.R.M. Adikan, A.W. Naji, M.
H. Al-Mansoori and M.A. Mahdi, “Experimental
investigation of pump propagating direction in double-pass Er3+-doped
fiber amplifiers”, IEICE Electron.
Express, vol. 2, no. 18, pp. 477-481, 2005.
52.
F. Abdullah, A.S.M. Noor, M.A. Mahdi, H.A.A.
Rashid and M.K. Abdullah, “Intracavity loss control effect on tuning range of
tunable dual Erbium-doped fiber laser”,
Laser Phy. Lett.,vol. 2, no. 11, pp. 535-537, 2005.
53.
S. Kabir, M.K. Abdullah, S. Khatun,
S.B.A. Anas and M.A. Mahdi, “Performance evaluation of a buffer
based CSMA/CD protocol for single channel optical Ethernet LAN”, Opt. Fiber Technol., vol. 11, no. 4, pp.
378-387, 2005.
54.
S.M.Sapuan, M.N.Suddin and N.Ismail and M.A.Maleque,
“Composite Product Development: Case Study in Automotive Bumper Fascia, Journal of Industrial Technology, 59-68,
2005
55.
S.M.Sapuan, M.A.Maleque, H.Hameedullah, M.N.Suddin
and N.Ismail “A note on the
conceptual design of Polymeric Composite Automotive Bumper System, Journal of Materials Processing Technology,
159, 145-151, 2005
56.
A.I. Ekhmaj, MSM Amin, S.
Salim and A.A. Zakaria, 2005. Wetting Fronts And Moisture Distribution Under A
Point Source. International Agricultural Engineering Journal, 14(2):67-75, 2005.
57.
Gawaher Muthanna and MSM Amin, 2005. Irrigation
Planning using Geographic Information System. Management of Environmental
Quality: An International Journal,
Vol. 16 No 4, Emerald Group Publishing Limited 1477-7835, 2005.
58.
Azni
Idris, Wan Nor Azmin MSM Amin and Abdullah AlMamun, 2005. The importance of
sullage (grey water) treatment in restoration and conservation of urban streams.
Intl J. River Basin Management Vol.3 No.3, IAHR & INBO, 2005.
59.
Mustafa Y.M., MSM Amin, T.S. Lee and A.R.M Shariff ,
Distributed Model For Changes In River Peak Flow Due To Land Development.
IEM Journal (Accepted for Publication), 2005.
60.
Rowshon, M.K, M.S.M. Amin, and A.R.M. Shariff. New
Performance Indicators and GIS for Evaluating Water Delivery of Rice-Based
Irrigation System. Journal of Paddy and Water Environment. PAWEES.
Springer-Verlag. (Accepted for publication)
61.
Deepak TJ, MSM Amin, ARM Shariff and TS Lee.
Strategies for Increasing Fresh Water Supplies in Deficit Areas. J. Hum. Ecol. (Accepted for publication Ref. No. JHE 1159).
62.
Wan Nor Azmin Sulaiman, Azni Idris, Abdullah AlMamun
and Mohd Amin Mohd Soom. Characteristics
of Sullage From An Urban residential Area in Malaysia. AMBIO A Journal Of
Human Environment, Royal Swedish Academy Of Sciences (under review).
63.
Aimrun W., M.S.M. Amin, and SM Eltaib. Pedotransfer Function Of Lowland Paddy Soils.
Journal of Paddy and Water Environment. PAWEES. Springer-Verlag.
(Submitted).
64.
Hassan S.M.H,
MSM. Amin, A.R.M. Shariff and M.M.Radzali. Determination
of Paddy Evapotranspiration Using
Lysimeters, Meteorological and Satellite Remote Sensing data. Paddy and
Water Environment (Submitted).
65.
Aimrun W, MSM Amin, M Rusnam, Desa Ahmad, MM Hanafi
and AR Anuar. Bulk Soil Electrical
Conductivity as an Estimator of Nutrients in the Maize Cultivated Land. Journal of Precision Agriculture, USA
(Submitted).
66.
Mustafa, Y.M., MSM Amin, T.S. Lee and A.R.M Shariff,
Evaluation Of Land Development Impact On A Tropical Watershed Hydrology Using
Remote Sensing And GIS. Journal of Spatial Hydrology. (Submitted).
67.
S.S. Ooi, S.V.
Wong, R.S. Radin Umar, A.A. Azhar and M.M.H.
Megat Ahmad, Cervical Spine Injuries Sustained by Motorcyclists in Road
Crashes in Malaysia, International Journal of Crashworthiness, 10(3), 295-303, 2005.
68.
K.S. Tan, S.V.
Wong, R.S. Radin Umar, N.K. Gupta, An Experimental Study of Deformation
Behaviour of Motorcycle Front Wheel-type Assembly Under Frontal Impact Loading,
International Journal of Impact Engineering (in press) – SCI rated as
best 20 Journal in Mechanical Engineering & Highest rated journal in Impact
Engineering
69.
Anizah Kalam, B.B. Sahari, Y.A. Khalid, S.V. Wong, Fatigue Behaviour Of Oil
Palm Fruit Bunch Fibre/Epoxy And Carbon Fibre/Epoxy Composites, Composite
Structures, 71(1), 34-44, 2005.
70.
T.H. Law, R.S. Radin Umar, S.V. Wong, The Malaysia Government’s Road Accident Death Reduction Target
for Year 2010, International Association of Traffic and Safety Science, 29(1), 42-49, 2005.
71.
Rosnah Mohd. Yusuff, M.S.J. Hashmi and Lo Woon
Chek. Advanced manufacturing Technologies in SMEs: Strategic Requirements for
implementation in a developing Country. Special feature. AsiaPacific Tech
Monitor J. Vol. 22 No.3. May-June, p23-29.
72.
Rosnah Mohd. Yusuff, Sharifah
Norazizan Syed Abdul Rashid, Nurazrul Shida Hashim, Tengku Aizan Hamid, , Ahmad
Hariza Hashim, Aini Mat Said, Lina Goh Siew Cheng, Lo Woon Chek & Mohd.
Rizal Hussain. Comparison of Anthropometric Dimensions Amongst various Elderly
Population. Asia J. of Public Health (In press), 2005.
73.
Sharifah Norazizan Syed Abdul Rashid, Tengku Aizan
Hamid, Rosnah Mohd. Yusuff, Ahmad Hariza Hashim, Ruhaizin Sulaiman, Aini
Mat Said, Azizah Salim Syed Salim, Mohd. Rizal Hussain & Lina Goh Siew
Cheng, Anthropometric Data of Older Malaysians. Asia J. of Public Health (In
press), 2005.
74.
A.B. Ibitoye, A.M.S. Hamouda, S.V. Wong and
R.S. Radin, Simulation of motorcyclist's kinematics during impact with W-Beam
guardrail, Advances
in Engineering Software, Volume 37, Issue 1, January 2006, pp 56-61.
75.
A.S. Abosbaia, E. Mahdi, A.M.S. Hamouda, B.B.
Sahari and A.S. Mokhtar, Energy Absorption Capability Of Laterally Loaded Segmented
Composite Tubes, Composite Structures, Volume 70, Issue 3,
September 2005, pp 356-373.
76.
Lim Ying Pio, Shamsuddin Sulaiman, A.M.S. Hamouda and
Megat Mohamad Hamdan Megat Ahmad, Grain Refinement Of LM6 Al–Si Alloy Sand
Castings To Enhance Mechanical Properties, Journal of Materials
Processing Technology, Volumes 162-163, 15 May 2005, pp 435-441.
77.
E. Mahdi, A.S.M Hamouda, A.S. Mokhtar and D.
L. Majid, Many Aspects To Improve Damage Tolerance Of Collapsible Composite
Energy Absorber Devices, Composite Structures, Volume 67, Issue 2,
February 2005, Pages 175-187
78.
T.R. Vijayaram, S. Sulaiman, A.M.S.
Hamouda, M.H.M. Ahmad, Numerical Simulation Of Casting Solidification In
Permanent Metallic Molds, Journal of Materials Processing Technology, (Accepted
in Press, 2005)
79.
T.R. Vijayaram, S. Sulaiman, A.M.S. Hamouda,
M.H.M. Ahmad. Foundry Quality Control Aspects And Prospects To Reduce Scrap
Rework And Rejection In Metal Casting Manufacturing Industries, Journal of Materials Processing Technology, (Accepted in Press,
2005)
80.
T.R. Vijayaram, S. Sulaiman, A.M.S.
Hamouda, M.H.M. Ahmad, Fabrication Of Fiber Reinforced Metal Matrix
Composites By Squeeze Casting Technology, Journal
of Materials Processing Technology, (Accepted in Press, 2005)
81.
Elfetori
F. Abdewi, S. Sulaiman, A.M.S. Hamouda, E. Mahdi,
Effect Of Geometry On The Crushing Behaviour Of Laminated Corrugated Composite
Tubes, Journal of Materials Processing Technology, (Accepted in Press, 2005)
82.
Ali T. Hasan, A.M.S. Hamouda *, N. Ismail,
H.M.A.A. Al-Assadi, An
Artificial Neural Network Strategy For The Forward Kinematics Of Robot Control,
Int. J. Intelligent Systems Technologies and Applications ( in Press
2005)
83.
M. F. M. Alkbir, A.M.S. Hamouda,
E. Mahdi and S.M. Sapuan Experimental quasi- static axial crushing of hexagonal
composite tubes, Polymer and Polymer Composite, (Accepted in Press)
84.
Recent Advances in Accident Analysis, Prevention and
Control, International Journal of Vehicle Safety (Guest Editors of the
Journal, in process 2006).
85.
Ali T. Hasan, A.M.S. Hamouda, N. Ismail,
H.M.A.A. Al-Assadi, An adaptive-learning algorithm to solve the inverse
kinematics problem of a 6 D.O.F serial robot manipulator, Advances in
Engineering Software (Accepted in
Press)
86.
F.M. Shuaeib, A.M.S. Hamouda, S.V. Wong, R.S.
Radin Umar and M.M.H. Megat Ahmed, A New Motorcycle Helmet Liner Material: The
Finite Element Simulation And Design Of Experiment Optimization, Materials
& Design, In Press, September 2005.
87.
Y.A. Khalid, S.A. Mutasher, B.B. Sahari and A.M.S.
Hamouda, Bending Fatigue Behavior Of Hybrid Aluminum/Composite Drive
Shafts, Materials & Design, In Press, Corrected Proof, Available
online 26 August 2005.
88.
F.H. Abdalla, S.A. Mutasher, Y.A. Khalid, S.M.
Sapuan, A.M.S. Hamouda, B.B. Sahari and M.M. Hamdan, Design And Fabrication
Of Low Cost Filament Winding Machine, Materials & Design, In Press,
Corrected Proof, August 2005.
89.
K.S. Tan, S.V. Wong, R.S. Radin Umar, A.M.S.
Hamouda and N.K. Gupta, An Experimental Study Of Deformation Behaviour Of
Motorcycle Front Wheel-Tyre Assembly Under Frontal Impact Loading, International
Journal of Impact Engineering, In Press, Corrected Proof, July 2005.
90.
A.M.S. Hamouda, R.M.Sohaimi, Modeling Ballistic
Impact, Chapter in a Book” Lightweight ballistic composites for military and law-enforcement
applications”, Edited by A Bhatnagar,
ISBN 1- 85573-941-0, 300 pages, Woodhead Publishing, UK (2006)
91.
Finite Element Modeling (FEM) Techniques & Their
Application to Hip Implants, Chapter in “ Biomechanical Systems” Edited
by Prof. Cornelius T. Leondes, of University of California, LA, USA.
92.
Elgali, A.M.S. Hamouda, E. Mahdi, and B.B.
Sahari, Energy Absorption Capabilities Of Woven Roving
Glass/Epoxy Composite Tubes: Effect Of Tubes Length, Strength,
Fracture and Complexity: An International Journal, Vol. 3,
2005, pp. 15-23.
93.
E. Mahdi, Alkolose, O. and A. M. S. Hamouda,
Energy absorption of woven roving wound laminated corrugated tubes under axial
quasi-static loading, Polymer and Polymer Composite: An International
Journal, (in press 2006)
94.
Ellipticity ratio effect in laterally crushed
composite tubes. International Journal of advanced Composite Materials
(Accepted; 2005)