| NAME |
BARKAWI BIN SAHARI |
|
| TITLE |
PROF IR DR |
| INSTITUTION |
UNIVERSITI PUTRA MALAYSIA |
| NATIONALITY |
MALAYSIAN |
| GENDER |
MALE |
| RACE |
MALAY |
| ADDRESS (OFFICE) |
| JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN, FAKULTI KEJURUTERAAN, UNIVERSITI PUTRA MALAYSIA, 43400 UPM SERDANG |
|
| TEL. NO. (OFFICE) |
603-89466328 |
| FAX NO. |
0389466061 |
| E-MAIL ADDRESS |
barkawi@eng.upm.edu.my |
|
|
| DESIGNATION |
PROFESSOR |
| APPOINTMENT STATUS |
PERMANENT |
| ADMINISTRATIVE POST |
DIRECTOR, INSTITUT TEKNOLOGI MAJU (ITMA), UNIVERSITI PUTRA MALAYSIA |
ACADEMIC QUALIFICATION
(Qualification),(Discipline),(Institution),(Year).
| Bachelor, MECHANICAL ENGINEERING, UNIVERSITY OF NOTTINGHAM, UNITED KINGDOM, 1981. |
| PhD, MECHANICAL ENGINEERING, STRESS ANALYSIS, UNIVERSITY OF NOTTINGHAM, UNITED KINGDOM, 1984. |
PROFESSIONAL QUALIFICATION
(Qualification),(Discipline),(Institution),(Year).
| P.ENG, MECHANICAL ENGINEERING, BOARD OF ENGINEERS, MALAYSIA, 1991. |
| MEMBER INSTITUTION OF ENGINEERS MALAYSIA (MIEM), MECHANICAL ENGINEERING, INSTITUTION OF ENGINEERS MALAYSIA, 1991. |
PREVIOUS APPOINTMENT
(Post),(Organisation),(From)-(Until).
| LECTURER, UNIVERSITI PUTRA MALAYSIA, 1984-1996. |
| ASSOCIATE PROFESSOR, UNIVERSITI PUTRA MALAYSIA, 1996-2002. |
| PROFESSOR, UNIVERSITI PUTRA MALAYSIA, 2002-TO DATE. |
AREAS OF EXPERTISE
(Main),(Sub),(Area).
| ENGINEERING SCIENCES, Mechanical Engineering, . |
RESEARCH
(Project title),(Role in project),(From)-(Until),(Source),(Level).
| CNGDI ENGINE AND TRANSMISSION, Project Leader, 2002-2006, MOSTI (IRPA PR), National. |
| VEHICLE BODY ARCHITECTURE AND INTEGRATION, Project Leader, 2002-2006, MOSTI (IRPA PR), National. |
| ELASTOMERIC PUSH FIT INTEGRAL SPIGOT AND SOCKET STEEL PIPE JOINTS, Project Leader, 1999-2002, MOSTI (IRPA EA), National. |
EXPERT CONSULTATION/CONSULTANCY
(Title),(Organisation),(Role),(From)-(Until),(Level).
| SURVEY ON THE ADVANCED TECHNICAL SKILLS REQUIREMENT FOR MANUFACTURING, MARA, Consultant, 1999-2000, National. |
EXPERT/TECHNICAL CONTRIBUTIONS
(Activity),(Organisation),(Role),(From)-(Until),(Level).
| PANEL PENILAI ANUGERAH INOVASI INDUSTRI IPTA, MOSTI, Committee Member, 2006, National. |
| Panel Member for Lembaga Akredatasi Negara, LEMBAGA AKREDITASI NEGARA (LAN), Consultant, 2002-PRESENT, National. |
AWARDS AND RECOGNITIONS
(Name of award),(Awarding Institution),(Year),(Level).
| GOLD MEDAL, ITEX 06, 2006, National. |
| HENRY GOH SPECIAL AWARD FOR BEST INVENTION FOR ENVIRONMENT, ITEX06, 2006, National. |
PUBLICATIONS
(Publication),-(Type of Publication).
| Y.A. Khalid, C.L. Chan, b.B. Sahari, A.M.S. Hamouda,"Bending Behaviour of Corrugated web beams", Jnl. Of Materials Processing Technology, 150 (2004) 242-254, - Journal |
| A.M. Elgalai, E. Mahdi, A.M.S. hamouda, B.B. Sahari,"Crushing response of composite corrugated tubes to quasi-static axial loading",Composite Structures 66 (2004) 665-671, - Journal |
| T.G. Chuah, J. Gimbun, T.S.Y. Choong, B.S. Barkawi."A finite element study of three-way catalytic converter for Nox abatement under transient isothermal condition,"Int. Jnl. Engineering and Technology, Vol. 1, No. 2, 2004, 188-196., - Journal |
| Anizah Kalam, B. B. Sahari, Y. A. Khalid, S. V. Wong,"Fatigue behaviours of oil palm fruit bunch fibre/epoxy and carbon fibre/epoxy composites",Journal of Composite Structures, 71 (2005) 34-44, - Journal |
| Y. A. Khalid, F. A. Ali, B. B. Sahari, E. M. A. Saad,"Performance of composite I-beams under axial compression and bending load modes",Jnl. Materials and Design 26 (2005) 127-135., - Journal |
| S. A. Mutasher, B. B. Sahari, A. M. S. Hamouda, S. M. Sapuan, Static torsion capacity of a hybrid alumunium glass fiber composite hollow shaft , American Journal of Applied Science (Special Issue): 67-71, 2005, - Journal |
| O.M.S. Alkoles, E. Mahdi,, A.M.S. Hamouda, B.B. Sahari Ellipcity ratio effects in the energy absorption of axially crushed composit tubes , Applied Composite Materials 10: 339-363, 2003., - Journal |
| E. Mahdi, A.M.S. Hamouda, B.B. Sahari, Y.A. Khalid, Experimental quasi-static axial crushing of cone-tube-cone composite systems , Composites: Part B 34 285-302 2003., - Journal |
| Assad A. Khalid, B. B. Sahari, Yousif A. Khalid Performance of composite cones under axial compression loading Journal Of Composite Science and Technology 62 (2002) 17-27., - Journal |
| E. Mahdi, B.B. Sahari, A.M.S. Hamouda, Y.A. Khalid, An Experimental Investigation Into Crushing Behaviour Of Filament Wound Laminated Cone-Cone Intersection Composite Shells , Journal Of Composite Structures, Vol. 51, No. 3, Pp 211-219, 2001., - Journal |
INTELLECTUAL PROPERTY RIGHTS
(Name of product),(Types),(Status),(National/International Patent),(Year),(Commercialised if yes).
| Body Structure for Natural Gas Vehicles, Patent, Pending, National, 0, |
| Front Floor Natural Gas Vehicles Platforms Structure, Patent, Pending, National, 0, |
| Mounting Bracket, Patent, Pending, National, 0, |
| Backbone structure of Front Vehicle, Patent, Pending, National, 0, |
| Tank Mounting Structure, Patent, Pending, National, 0, |
| Rear Floor Natural Gas Vehicles Platform, Patent, Pending, National, 0, |
POST GRADUATE SUPERVISION
(Student's Name),(Degree),(Thesis Title),(Year Awarded).
| Assad Abdullah Khalid, PhD, Finite element investigation of composite conical crash energy absorber, 1999. |
| El-Sadiq Mahdi Ahmed, PhD, 12. Finite element and experimental investigation of crash behaviour of carbon fibre, glass fibre and palm oil fronds /epoxy cones, 2000. |
| Mohabattul Zaman B. SNS Bukhari, Masters, The Development of a No-Clean Solder for Radio Frequency Power Modules, 1997. |
| Abdalla F Hamed, Masters, Experimental and Finite Element assessment of Tubular Joints, 1999. |
| Nuraini Abd. Aziz,, Masters, 11. Finite element analysis of integral push fit elastomeric spigot and socket steel pipe joints, 2000. |
| Faeiza Abd. Aziz, Masters, 10. Experimental investigation of integral push fit elastomeric spigot and socket steel pipe joints, 2001. |
| Anizah Kalam, Masters, Fatigue analysis of oil palm fruit bunch and carbon fibre/epoxy composites, 2003. |
| Haifaa Aziz Ameen, Masters, Axial and circumferential loading effect on crushing of composite cylinders, 2003. |
| El-Sadiq Mahdi Ahmed, Masters, Filament wound natural fibre reinforced compoistes, 1997. |
EXPERT LINKAGES
(Description),(Organisation),(Year of Involvement),(Duration),(Level).
| JSPS, KYOTO UNIVERSITI, 1989, 1 month(s), International. |
| CICHE, BRADFORD UNIVERSITY, UK, 1985, 60 month(s), International. |
Click to Print This Page |
